Proper Handling 

You can minimize the potential for complications considerably by handling your best multi tool with care. For starters, you should ensure that the tool and attachable piece you use are designed for the job at hand. For example, certain attachable pieces work great on some materials but are horrible on others. Using the wrong tool can have negative results that damage your multi tool or put you in harm's way. You should also keep your fingers away from the on and off switch once the tool turned on. If your best multi tool happens to incur any damage, it's necessary to have it fixed or replaced before using it any further. Otherwise, you're taking an unnecessary risk. 

Don't Work Too Quickly

Falling behind on a project can be stressful and you may feel the need to work hastily to get everything completed on time. The problem is that working too quickly can easily lead to careless mistakes and put you at risk. This is especially true when using an attachable blade that's cutting at a high speed. Without proper care, you can get seriously cut or worse. For this reason, you should never rush through a project and always take your time. Not only will this keep you safe, but your craftsmanship and overall results should be optimized.

Clean Work Area 

It's also critical to follow proper maintenance procedures for keeping your work area in good shape. Cleaning wood chips, dirt and other debris is a good way to start. Keeping things organized and not letting clutter pile up is important. Adequate lighting is also important because without it it's easy to make mistakes. Consequently, it's smart to periodically clean your work area and keep everything in reasonable condition.

Proper Clothing 

Before using your best power tool, you should be wearing the right type of clothing to prevent accidents. Jewelry and similar accessories that hang down should be removed. It's ideal to wear a short sleeved shirt because long sleeves can get caught in a tool. If you do wear a long sleeved shirt, make sure that it's relatively tight around the wrists and not too loose. When dealing with wood or any material that creates flying debris, safety goggles should be worn to protect your eyes. You may also want to insert ear plugs when working for long periods with your best multi tool to protect your hearing. 

Use Clamps When Necessary

Any time you're working on a project where materials could slip or skid, it's necessary to secure them in place. Clamps or a vice tend to work well for providing stability and keeping you safe throughout the process. Just make sure that materials are completely secure before using your best multi tool. 

Use this coupon code on your next purchase at FitzAllBlades to save 12% off of your next purchase.

Coupon Code - fathersday12 
DISCOUNT WILL SHOW AT THE BOTTOM OF THE CHECKOUT!!!!!

Good Until 6/17/13 (ACT QUICK) 
excludes our 13 blade set

Thank You for being a valued customer

The FitzAllBlades Team

Multi tool blades come in dozens of variations, and they are the real key to these tools.  With the right blades, you can turn one multi tool into several different pieces of equipment, pretty much getting rid of the need for half a garage or truck full of tools.  If you already have a circular saw, band saw, reciprocating saw, power sander, polishing wheel, rasp, power scraper, chisel set, and full set of traditional hand tools, that’s great.  The question is – how much of that stuff do you feel like carrying around with you?  Those of us who have practically every tool known to mankind can enjoy them all in a nice, well-powered workshop where we can spread things out.  If that’s the only way you work, then you are really lucky.  Most of us don’t have such convenience.  The majority of repair and construction projects don’t take place in the hobby shop.  They happen on-site.  That typically means you have to transport your tools across rooftops, over ice, through mud, up in trees, underneath sinks, behind refrigerators, up in attics, in tiny bathrooms, or other cramped or hard-to-reach spaces.  If this sounds like your life, you have GOT to get a multi tool if you don’t have one already.

Multi tool blades in the pocket and an oscillating tool in your hand or in a case or bag with a strap – that’s all you need for a lot of jobs.  You can travel really light and still do an incredible variety of work: shaping wood, cutting plastics and fiberglass, trimming carpet, scraping up dried concrete and paint, removing tile grout, cutting linoleum, polishing metals, ripping through branches, or making precise custom moldings.  The tools tend to be light and very easy to handle, giving you tremendous control over your job.  In terms of speed, it tends to be much faster to switch out a blade than it is to witch tools entirely.

The one potential drawback of the oscillating multi tool is really the same drawback of using any power tool – eventually, you have to replace the attachments.  Multi tool blades are not typically cheap, especially the brand name blades.  However, there is a way to escape paying brand name prices for your blades.  There are a few places that manufacture off-brand replacement blades.  Some of them are definitely better than others.  Most of the buzz these days seems to be centering on fitzallblades.com because they are supplying really precise, high quality blades of every variety.  They are compatible with every make and model, and the prices are impressively low – a small fraction of what you would have to pay if you got the blades from the name brand tool manufacturer.  If you use your multi tool a lot, having the option of replacing your blades less expensively through an off-brand manufacturer may be the best way to reduce your costs.  There are a few good sources out there, so it’s worth it to do a little bit of shopping around.

Basically, a multi tool’s blade oscillates back and forth at ridiculously high speeds.  This emulates a sawing / cutting / sanding / scraping / polishing motion.  Oscillating tool blades are the real key.  These interchangeable blades basically transform the core tool unit from one kind of tool into another.  The same tool can be used for literally dozens of types of jobs just by switching out the blade.  Oscillating tool blades are available in huge varieties by all of the companies that make this kind of tool, and different ones can be used on concrete, stone, all kinds of wood, metals, fiberglass, plastics, cardboard, carpet, tile, grout, dried paint, and tons of other stuff.  It just depends on the blade.

One of the things I like best about these tools is that they make my least favorite jobs a little bit more tolerable.  Everybody’s different, and we all have jobs that we hate.  I hate scraping more than anything in the world.  Scraping paint, grout, and dried concrete is like a sentence to Alcatraz for me.  I don’t know why.  Thank God, some people I know don’t mind it too much.  I try to get them to do it for me, but it doesn’t always work out.  With these multi tools, you can just pop in a scraping blade and let the tool do all the work.  They have a variety of scraping blades, including diamond blades for the really hard stuff.

Another thing about these multi tools is that they are light and easy to maneuver with.  You might have to lug tools up ladders, into attics, under porches, behind big appliances, over roofs, across ice… any number of tricky places.  The traditional hand and power tools are way too bulky to do this stuff without risking a strained back or worse.  And, once you get there, it’s sometimes hard to even get the tool in position to get at what needs to be cut, shaped, scraped, or otherwise altered.  Now I just grab the multi tool, a handful of blades, and head on my merry way.  Sometimes you may also need a few other tools, but this option really lightens the load.

It also saves you cash because you simply don’t have to buy so many tools.  The only thing that can really add up is the cost of replacement blades.  Oscillating tool blades are not cheap, especially if you buy the name brand ones.  Some blades can cost upward of $30 or more, which gets pretty pricey when you are depending on them every day.  To remedy this, you can check out the better off-brand replacement blade suppliers.  There are a couple of companies that make replacement blades that will fit any oscillating tool.  The best one I have found so far is fitzallblades.com.  These guys are a Godsend because their blades are every bit as good as the name brand ones, just as precise and every bit as durable, but they cost a fraction as much.

Now Dremel has taken it up yet another notch by expanding its line of tools into oscillating movements.  Oscillating multi-tools have become a favorite among craftsmen and hobbyists, especially for heavy-duty cutting, scraping, sanding, and polishing.  Now Dremel has created its own MULTIMAX oscillating tool and (of course) a wide variety of Dremel blades to use with the tool.  Just like the rotating tool attachments, the Dremel blades for the MULTIMAX are clever, useful, and well-made.  You can find Dremel blades that will cut, clean, shape or polish a range of materials, including soft and hard woods, tile, carpet, cardboard, particle board, fiberglass, metals, plastics, concrete, and just about anything else you could think of.  Dremel’s MULTIMAX can help you to zip through your repair, remodeling, upgrading, or construction jobs much more quickly and efficiently.

One of the best things about multi-tools like the MULTIMAX is that they allow you to travel light.  Anyone who has ever lugged around two or more giant tool boxes to a job can appreciate that.  In a lot of cases, you can just grab a MULTIMAX, a handful of Dremel blades, and head out the door.  That means fewer headaches, faster work, and less likelihood of losing things.  It’s also good when you are working in tight or less accessible spaces to have one light tool instead of a giant box of different tools.  This kind of convenience can also save your back and muscles from the strains and aches that even young and healthy craftsmen can get from trying to haul a ton of tools up ladders or over treacherous terrain.

Before investing in a multi-tool, you should be aware that blade replacement costs can add up.  Depending on how much work you do with your multi-tool, you can go through even the highest quality blades pretty quickly.  We are usually not talking about cutting Styrofoam with these things.  Most people use them to cut some pretty tough materials, and this can wear out even the best blades pretty fast.  No matter how long the tool lasts, any kind of blade or attachment for a power tool will eventually wear out.  Oscillating blades are no exception.   Dremel blades are not as expensive as some of the other brands, but the costs can still add up.  You can find replacement blades for the Dremel MULTIMAX provided by independent manufacturers who charge a fraction of name-brand prices for replacement blades of equal quality to the name-brands.  Among these companies, FitzALLblades.com has earned a reputation as being the very best source for excellent replacement blades for Dremel, Fein, and Rockwell oscillating tools.  The blade quality and durability is just as impressive as the name-brand blades, but the price usually ranges from one half to one fifth.

Multi-use oscillating tools are like a gift from above, and the Multimaster is one of the very best.  You can grab this one tool and a hand full of blades that will fit in a shirt pocket and do the work that would normally take a truck full of tools to do.  You can make long, short, deep, or shallow cuts in many materials, scrape tile grout with practically no effort, shape wood, sand and polish metal, and scrape up dried paint, dried concrete, and just about any other mess that tends to happen on the job.  You can use Fein blades to quickly gut an entire kitchen or to do the most delicate repairs on fine wood moldings.

The tool is top-notch, but the blades deserve credit too.  Fein makes a blade for everything.  The trick is to do just a little bit of research to making sure you are using the right tool for the job.  The Multimaster tool will probably last for years, but the blades are effectively disposable.  There’s nothing at all wrong with Fein blades.  In fact, they are as good as you can get.  It’s just inevitable.  No blade or attachment for any power tool is going to last forever.  Eventually, even the best-made blades are going to wear out, so it’s good to know your options for replacement blades.  Depending on your usage, replacement blade costs can really add up.  If you buy a Fein Multimaster to keep around the house for odd jobs, repairs, and hobby projects, you probably won’t rack up much of a bill for replacement blades.  If you are a professional craftsman, the replacement blades can cost you a fortune pretty quickly.

Fortunately, you have options when it comes to Multimaster replacement blades.   Some companies offer replacement blades that will work with Fein, Dremel, or Rockwell multi-tools, but you have to be careful about both quality and price.  Some are cheap but not very dependable.  Others are pricey but quite good.  It’s usually the classic example of “getting what you pay for.”  Fortunately, you can get a good balance of quality and low prices if you look for it.  The best example of this is probably FitzALLblades.com.  They have extremely high-quality replacement blades for very low prices, and they have climbed to the top of the replacement blade market because of this.  Craftsmen from all over the world have found that they can save a fortune by getting replacement blades that are fully compatible with Fein, Rockwell, and Dremel oscillating tools, just as precise and durable, but at one half to one fifth of the price of the name-brand blades.

Much of the genius of these tools lies in the blades.  You can find an incredible number of blade types to do just about anything you can think of in terms of power tools – fine cutting, rough sawing, polishing, scraping, sanding , shaping, and more.  They have blades that can work on metals, copper pipe, plastic piping, fiberglass, cardboard, carpet, hardwoods, sheet plastic, tile, concrete, particle board, drywall, and a bunch of other materials.  You can scrape up paint or concrete, cut copper pipe, trim carpet, fit tile, repair hardwood flooring, and refurbish metal, all with one Rockwell sonicrafter.  People who are into crafts have even found that these tools are great for cutting and shaping unusual materials like buffalo horn.

The sonicrafter is worth every penny, and it will probably last you for years.  However, the cost for blades can really get expensive after a while.  The blades are made with high-quality materials, but even very durable blades will not last terribly long if you are getting good use out of them.  It’s a good idea to investigate all of your options for replacement blades for your multi-tool.  If you want to save cash, you should look into off-brand replacement blades.  The best ones are of quality that’s equal to the name brands at half or less of the cost.  FitzALLblades.com is a great example of a reliable source for the highest quality replacement blades for Rockwell, Dremel, and Fein multi-tools.  They provide exceptionally high quality blades at a fraction of a cost of the name brands.  They are especially great for Rockwell users because this tool has a very distinctive arbor pattern that is not compatible with most replacement blades.  FitzALLblades.com offers an adaptor that will allow you to use their replacement blades for Rockwell tools with perfect compatibility and function.

Using the right combination of Bosch multi tool and Bosch blades you can cut wood, plastic, fiberglass, carpet, cardboard, sheet metal, foam, and many other materials. You can scrape tile grout, dried concrete or paint. You can score concrete or stone, shape wood, or polish metal. This one tool and a few blades is like having a whole truck load of standard tools.

One of the big advantages to using the Bosch blades with a multi tool is savings. You don’t have to buy or replace as many tools when you have one reliable piece of equipment that can transform into a dozen or more different tools with just a quick blade switch-out.

Maybe you already have a whole garage full of power tools. That doesn’t necessarily mean that you want to lug them around all the time! Would you rather haul around a circular saw, power sander, polishing tool, reciprocating saw, scroll saw, band saw, and scraping tools or grab one Bosch multi tool and a shirt pocket full of practically weightless blades? Call me lazy, but I prefer to travel light.

Traveling light is not just a matter of convenience. It’s also a matter of safety and a matter of quality. Heavy, awkward tools are harder to use with precision. They are also harder to carry and to fit into tight or inaccessible spaces. If you only tinker in a well-stocked workshop with plenty of space and a million outlets for juice, you may not worry about these things. If you are like most craftsmen, you occasionally have to carry your tools over ice, through mud, up ladders, down rickety basement steps, into crawlspaces, onto roofs, or who knows where else. This is not fun. The Bosch multi tools don’t exactly make it fun either, but they do make it more tolerable because they are so lightweight and easy to pop into a bag or carrying case you can just hang from a belt or
shoulder harness.

Considering all the money and stress that these multi tools can save you, it’s pretty easy to see why craftsmen all over the world see these as the wave of the future. Really the only ongoing expense is for replacement blades. These can add up, depending on how much you use the tool. The Bosch blades are not as expensive as some, but they can still hurt the wallet after a while. The tool really lasts, but any blade for any power tool is going to need to be replaced eventually. Most of the craftsmen I have talked to so far about multi tools recommend fitzallblades.com as the best source for replacement multi tool blades that are just as precise and tough as the name brand blades but cost ½ to 1/5 of the price.

Most people know about the great selection of Craftsman hand tools and standard power tools available, but some folks don’t know about one of their more recent additions to the lineup – the oscillating multi tool called Nextec.  Oscillating multi tools are becoming the tools of choice for craftsmen all over the world because they offer some pretty big advantages over traditional tools.  These multi tools have interchangeable blades that oscillate back and forth at incredible high speeds, allowing them to saw, cut, scrape, sand, and polish a wide variety of materials.  One Nextec can potentially take the place of a power sander, a circular saw, a reciprocating saw, a polishing wheel, an electric chainsaw, and several rotating tools and attachments.  It all comes down to picking the right Craftsman blades for your Nextec multi tool.  These blades are practically weightless, but they turn your Nextec into a dozen different tools when you switch them out for the right job.  In terms of materials, it’s amazing what you can work on with one of these multi tools: tile, hardwood, soft wood, sheet metal, fiberglass, plastics, cardboard, carpet, grout, concrete… the list goes on and on.

Having this kind of versatility can save you a fortune.  Like many of us, you may already have a garage full of power tools.  If you don’t already have a massive collection, you can save yourself some really serious cash by picking up a Craftsman Nextec and some Craftsman blades instead of paying separately for a bunch of different tools.  If you have the chance, pick up the Nextec first and then experiment and figure out the few things that it can’t do.  Then go buy the tools to fill in the gaps.  Even if you have a truck load of tools already, it’s worth getting the Nextec instead of replacing those tools once they finally give out on you.  This will help you to save some green as well.

Besides the huge monetary savings of using a multi tool, there is the equally important fact that it allows you to travel light.  Anyone who has tried to maneuver bulky tools in and out of vehicles, up ladders, down tight basement steps, underneath sinks, through mud, across ice, or over roof peaks knows how hard (and potentially dangerous) these trips can be.  With a multi tool you can often grab one relatively light tool, a handful of blades, and head out to get the job done.  This means fewer accidents, strained muscles, sore backs, and slip-ups.

The Nextec is a durable tool that is likely to last you years and years.  However, the blades do eventually wear out, like any power tool attachment.  Craftsman blades are not as expensive as some other brands, but they still add up pretty fast if you use them a lot.  Fortunately, you have the option of buying replacement blades online that are perfectly compatible and just as tough and precise.  A few companies have emerged to offer these off-brand replacement blades for multi tools, but most craftsmen who have tried them seem to agree that fitzallblades.com offers the best quality and prices (from ½ to 1/5 of the name brand blades).  Whether you choose to get your replacement blades from fitzallblades or directly from Craftsman, the expense of the blades is well worth the convenience you get from the multi tool.

All of our blades and accessories are tough, precise, versatile, and durable.  Best of all, they average between 1/5 to 1/2 the price of the name brand blades.  If you have put off buying a name-brand multi tool because of the price of store-bought replacement blades, you no longer need to worry about that.  Go ahead and drop a few bucks on a top-of-the-line fein, bosch, dremel, craftsman, or sonicrafter multi tool.  Don’t worry about blade replacement costs.  We’ve got you covered.

There’s a fun little alternative that may be great for some people – multi tool blades.  It may sound a bit silly at first, but craftsmen, craftswomen, sculptors, carpenters, drywall hangers, concrete workers, plumbers, contractors, and many other kinds of people spend hours a week with an oscillating multi tool in their hands.  These tools have revolutionized many industries.  They are versatile, light, and easy to use.  You can switch the blades out to change the tool’s function in a few seconds.  People love them.  The only drawback is that the blades eventually wear out, and the name brand equipment, like fein blades or dremel accessories, are really expensive.  If someone in your family uses these tools, you can snoop around a little bit, find out what blades they use, and then buy replacements through Fitzallblades.com.  You can save them a bundle, and make their lives easier, by stocking them up on some of their favorite blades, and maybe a little bit of candy or a movie so they have some variety.  Not everyone would appreciate a handful of diamond edged fein blades or some high quality steel dremel accessories in their stockings, people who use an oscillating multi tool regularly are going to be delighted when they find their favorite brand of scraper blades hung by the chimney with care.  It helps them out, and it shows that you really put some thought into their presents.

They expect the same junk food in the stocking and what do you know?!  “It’s a Christmas Miracle!  I was almost out of these blades!  I go through them like tissues on the job!”  You have maintained the time-honored Christmas tradition of stocking hanging with a practical, modern twist.  If you know someone who uses these tools, you may want to give it a try.

The only downside is that the replacement blades can be expensive.  That’s why you need Fitzallblades.com.  Many companies offer excellent multi tools, but if you buy name brand multimaster blades, dremel attachments, or fein multitool blades, you are going to pay out the nose for them.  We offer very high quality, precise, durable replacements for dremel attachments, craftsman blades, sonicrafter equipment, multimaster blades, bosch blades, fein multitool blades, and much more.  No matter which multi tool you decide to buy, you will find that we have the best off-brand replacement equipment available, blades and accessories to match all the best tools.  The best part is that our superb replacements are available at a fraction of the cost of name brand blades and attachments, usually one half to one fifth the price.  This means that you can save an impressive amount of cash as you prep your house and prepare for a new life.

One multi tool can scrape paint (a task no one seems to enjoy), remove dried concrete or drywall mud, cut wood and other materials with surgical precision, grind metal, trim carpet, and do about two dozen other jobs that would take too long to list here.  All blades for multi tools are virtually weightless, and the tools themselves are lightweight and very portable.  You easily grab an oscillating power tool and a hand full of blades, and head up a basement ladder, onto a roof, under a sink, or wherever else the job takes you.  If you like doing arts and crafts, you may find that an oscillating multi tool is just the thing for you.  People use them to sculpt and shape all kinds of wood, hide, horn, cardboard, carpet, and other materials.  If you need to grind or polish metal, they are the perfect tools.  These tools combine power, precision, and control, the most important factors in power tools, empowering you to take on projects that you may not have thought to attempt otherwise.

Multi tool blades are amazing works of engineering, but they can get very expensive.  The good news is that all blades and oscillating power tool accessories are available right here at Fitzallblades.com for a fraction of the name brand prices.  Once you buy the tool, the replacement blade prices can sneak up on you.  Some name brand blades cost $30 or more, which can get very expensive when you are using multiple blades for multiple projects.

Not every body shop is using oscillating multi tools, but the trend will probably grow.  These tools are relatively new, and not everyone has warmed up to them yet, but they probably should.  We are all familiar with a variety of spinning bit tools like drills and certain types of polishers and grinders.  Oscillating multi tools can be fit with a wide variety of blades and attachments that they move back and forth at very high speeds.  There are many of these tools made by most of the great tool manufacturers: The Versa Tool, the Bosch Multi Cutter, the Rockwell Multi Tool, and others.  Dremel and Fein both make very good multi tools as well, and they all have a variety of blades for multiple uses.  The tools have very similar levels of precision, but there are differences in price, durability, and ergonomics.  When it comes to the blades, those are pretty similar in quality as well.  Bosch multi tool blades, fein blades, and sonicrafter blades are about equal in quality, and they do just about anything you can think of.  One of the great things about these tools is that it’s so easy to switch out blades without switching tools.  Even when you are working in your own shop, space can get a bit tight, and you may have to get under a car, climb into the trunk, or who knows what else?  It’s great to have one light tool that you can just pop blades in and out of to do totally different jobs.  Of course, there are heavy duty jobs that demand specialized tools, but it’s great to be able to grind metal, scrape paint, do intricate cuts in sheet metal, cut fiberglass, cut tubing and hose, and do a bunch of other jobs with one tool and a few blades.

Most people who buy one of these tools end up using the heck out of it, and the blade costs can add up pretty fast.  While the tools themselves are usually pretty durable, the blades will definitely wear out eventually, and some of the name brand blades can cost anywhere from $12 to $30 apiece!  Fortunately, FitzALLBlades is here to help, offering replacements for all major brand name multi tool blades and accessories at ½ to 1/5 the name brand cost.  These replacement blades are fully compatible, and FitzALLBlades uses a unique eight position arbor pattern to give you more options than ever when you need to cut, grind, sand, polish, or shape materials at a specific angle.

Heating costs can be absolutely brutal for families all over the country.  A good Fein multi tool with the right Fein blades can help you to trim insulation board, cut fiberglass insulation, or trim old carpet remnants to insulate windows, chilly floors, or other cold spots in the house.  When it comes to exterior painting, you can find sonicrafter blades, Bosch multi tool blades, and other blades that are made for scraping the old paint when you prep to put down your primer and your new coats of paint.  Many people actually enjoy painting, but they hate the prep work (especially the paint scraping) so much that they pay professionals to paint their houses.  A multi tool with a scraper blade makes the process quick and easy.  Most wood repairs are made easier with the wide variety of wood cutting blades available – flooring, cabinetry, furniture, etc.  If you want to re-tile a bathroom or kitchen, the scraper blades will make quick work of that awful old tile grout and adhesive that you will need to remove before putting in the new materials.

Many older homes have iron railings outside that have become rusty and unattractive.  You can even find blades that will scrape the rust and old paint right off so that you can prime and re-paint old iron to look as good as new.  You can use the same tool to cut shingles when re-roofing the house, prune tree branches, and do a number of other jobs.

After a little bit of experimentation, most people learn which blades they need to do their household jobs most effectively.  The tools themselves are impressively durable, but the blades will eventually wear out.  The only potential disadvantage to multi tools is the high cost of name-brand replacement blades.  Some blades can cost $10 to $32.  Fortunately, that is not such a major problem anymore because FitzALLblades offers replacements for Bosch multi tool blades, Fein blades, Dremel blades, Sonicrafter blades, and most other name-brand blades and accessories for a fraction of the retail price.

The real magic of these things comes from the blades.  Like the tools, the blades are pretty similar; Fein blades, Sonicrafter blades, Rockwell blades, and Bosch Multi Cutter blades are about the same in quality, and they all offer a huge variety of blades.  The question is: “What kind of work do you do on your cars or bikes?”  Once you start to look into it, you will probably find all kinds of uses: grinding, polishing, scraping, and cutting just about anything.  You may use one of these tools to cut fiberglass, sheet metal, seat leather, pipe, hose, tubing, plastics, rubber, or any number of other materials.  Some blades can be used for scraping paint, grinding metal, polishing metal, or scraping up dried compounds that may have accidentally gotten slopped onto the garage floor.

Once you take a look at your work habits, it’s not a bad idea to think about your travel patterns as well.  Many car and bike enthusiasts like to go to meets and rallies, often driving hundreds of miles away from home.  If you do this, you may want to invest in a cordless multi tool to take along on these trips.  You just never know what may come up.  If you camp, they are great.  You can use them for sharpening dull tent stakes, cutting kindling, zipping through tough cord or rope, etc.  If you are on the road and find that you need to improvise, you may find that you don’t exactly what you need the multi tool for until the situation comes up.  They are so light and easy to pack that it may be worth it just to throw it in with an assortment of blades.  You may have to modify parts, grind something down, or cut through who knows what kind of metal, cord, hose, light chain, branches, vines, or rope.  Depending upon how adventurous you tend to be, it’s easy to find yourself in a pickle while traveling around.

You can get these tools pretty inexpensively if you shop a little bit.  The ongoing cost that gets some people comes from the replacement blades.  Whether you go with Sonicrafter blades and tools, Fein blades, or Rockwell multi tool equipment, you will probably find that they all cut really quickly and precisely.  However, most name-brand blades are expensive to replace.  Some of the more expensive blades can run $30, which takes a huge bite out of your wallet after a while.  The good news is that you can get off-brand replacement blades through FitzALLblades that are made specifically to be compatible with the various name-brand tools.  These blades are extremely tough and precise, and they work perfectly with their designated tool types.  They are made with a special arbor pattern that allows for eight positions, so you can cut, grind, shape, or polish at a variety of angles.  Best of all, these replacements cost a fraction of the price of the name-brand blades.

Oscillating multi tools are great.  They are powerful, light, and incredibly versatile.  They really are like having many tools in one.  On a construction or remodeling job, you can use one tool to cut lumber to size, trim carpet, fit in flooring, trim shingles, rip out old wood or pipe, scrape up dried paint or concrete, and do about a hundred other things.  Whether you are using a Versa tool, Bosch multi cutter, Rockwell multi tool, Dremel multi tool, or some other brand, they are all spectacular.  All of the major power tool companies also offer blades of comparable quality; Fein blades, Sonicrafter blades, Dremel blades, and Bosch multi tool blades are all precise and tough.  I have never really heard any complaints about any of these tools or the quality of their blades.  Cabinet makers, house painters, roofers, remodelers, wood workers, plumbers, construction workers, and demolition workers all seem to love these things.

The only snag is the price of the replacement blades.  Many of the basic blades are over $10, and some of the expensive blades, like the diamond-coated ones, cost over $30.  If you are a hobbyist who only uses them once in a while, this is not that big of a deal.  If you have a business where you have a whole crew using these blades every day, it can devastate your bottom line.  Many people do not realize that there is another option.  You can purchase very high quality, durable, precise replacement blades for all of the name brand tools at a fraction of the cost.  FitzALLblades offers a vast assortment of replacements for Fein blades, Sonicrafter blades, Rockwell blades, Bosch multi tool blades, and many others.  They all have a unique eight position arbor pattern to allow you to work at various angles, and they all cost one-half to one-fifth of the name brand blades that they replace.  Switching to these replacements could possibly save a company huge amounts of money over the long term, maybe giving that little bit of an edge that makes the difference between beating the recession and falling victim to it.

The business world is getting more and more competitive all the time.  This is certainly true for contractors.  There is a lot of money to be made in the business, but also a lot of money to be lost.  Anyone who has worked as a contractor knows that it’s not quite as easy as some people seem to think.  New businesses are popping up all over the place, and it can be hard to stay on top, even if you have been in business for years.  Here are a few strategies that may help.

Saving Money on Replacements

Of course, saving money is just as important as making money.  This brings up another great thing about the internet – greater access to inexpensive equipment.  For instance, one of the biggest costs contractors have to deal with (next to taxes and payroll) is the cost of replacement items – saw blades, multi tool blades, sandpaper, paints, stains, and any other items that get used up.  Some of these are pretty cheap, but the costs add up quickly when you use this stuff every day.  Replacement oscillating blades can cost hundreds a week, depending on how big the job is.  For instance, some Fein blades or Sonicrafter blades cost up to $30 per blade, and they never last as long as we would like for them to.  It’s definitely worth it to do a little bit of net surfing because you can find high quality off-brand replacement blades for a fraction of the brand-name retail price.

Ethical Streamlining

It’s always difficult when you have to let someone go, for any reason.  In some cases, the employee deserves to be fired.  In other cases, they are simply costing you too much money.  One thing that you can do to make the process of “streamlining” your team a little bit smoother is to help the guys to find new work.  If you think an employee has potential, in your field or another, you might be able to find a good fit for him or her with another company.  You probably have contacts with other businesses that may be hiring.  If not, you can probably at least furnish a great letter of recommendation.  You don’t want to make problems for another employer, so try to be honest while focusing on the employee’s (ex-employee’s) strengths.  If you can help a worker make a smooth transition, you can have a clean conscience while doing what needs to be done.

Making Work Easier

A multi tool, or oscillating tool, makes work easier.  If you have not tried one of these things yet, it’s worth doing.  If you have a crew, then you know what it’s like keeping up with tools.  Things get lost, stolen, broken, you name it.  With a multi tool, you have one tool that does the job of at least 20.  It replaces practically every kind of saw, making powerful and precise cuts in any kind of wood, plus fiberglass, plywood, particle board, foam board, drywall, plastics, and many other materials.  It can handle tight angles, long cuts, plunge cuts, etc.  It all depends on the blade.  You pop in a different blade for different jobs.  They also have blades for scraping paint, removing tile grout, sanding, polishing, grinding, cleaning spilled concrete, and many other tasks.  These are light, easy to use, and versatile.  They also make it so much easier to keep track of tools.  As long as all of your multi tools are accounted for on the job, you are in good shape.  It’s better than carrying around and keeping track of a dozen or more different saws, scrapers, sanders, and such.  If a blade goes missing, it’s not that big of a loss.  This means that you save money because you buy fewer tools and you have less to lose or break.  Sonicrafter blades and tools are some of the best, but you can find excellent models from most tool companies.  Most of these tools have great warrantees, so you are in pretty good shape if you use them.

Using an Oscillating Tool for Convenience and Safety

The portability of these tools is a huge plus.  They are easier to carry and use in tough places like rooftops, trees, crawlspaces, under sinks, in attics, and other tight or inaccessible spots.  You can even get cordless versions, which are more transportable yet.  This is convenient, but it’s also a matter of safety.  The last thing you need is you or your workers hurting themselves.  Having one light tool cuts down on muscle strain, pulled backs, hernias, and (God forbid) wounds from slips of the blade due to bad positioning.  Of course, there is no tool in the world that does everything.  You will still need hammers, nail guns, and other tools.  But these are a big help, and can save all kinds of money and headaches.

Saving Cash on Multi Tool Blades

A multi tool can certainly be a blessing on the job, but the blades don’t last forever.  Even Sonicrafter blades wear out eventually, so it’s smart to find a supplier for off-brand oscillating tool blades that are high quality and precise.  Some blades can be as expensive as $30 if you buy the name brands, but fortunately, you can get very durable, precise replacements for any brand and style of blade for one fraction of the name brand retail price.  If you have a crew working with multi tools all day every day, the blade costs can be astronomical.  It’s the kind of cost that adds up a little bit at a time.  You may not even realize how much you have spent on blades until you calculate expenses at the end of the year.  Having a good supplier for replacement blades can save you hundreds, even thousands of dollars.  This can make all the difference when you are trying to improve your bottom line.

Streamlining Equipment with a Multi Tool

A multi tool, or oscillating tool, is a power tool that uses interchangeable blades to do a huge variety of jobs – the jobs of at least twenty standard tools.  These tools, depending on the blades, can be used to make precise cuts in a variety of materials: wood, drywall, fiberglass, plastics, foam board, plywood, paneling, carpeting, sheet metal, etc.  They can also be used to scrape up dried paint, tile grout, concrete, and other tough messes.  Tools are expensive, and anything that can be done to reduce the number of tools needed is going to save you money.  Multi tools are used by carpenters, plumbers, landscapers, carpet installers, body workers, mechanics, and many other types of workers.  By investing in a few oscillating tool kits with a variety of blades, you can save a fortune on tool costs.  Once you put a system in place to keep track of the tools, it will streamline your process in every way, and reduce incidents of loss and theft.  With fewer tools to keep track of, management becomes much easier.  Most major tool manufacturers now make versions of the multi tool; you can find Bosch, Fein, Dremel, Rockwell, and Sonicrafter blades and tools that are all very high quality, and come with great warrantees.

Saving on Blade Costs with Off-Brand Replacement Multi Tool Blades

Multi tool blades are generally tough, precise, and versatile.  But they don’t last forever.  They will eventually wear out.  The good news is that you only have to replace the blade, not the whole tool.  The bad news is that blade costs can add up.  Fein, Bosch, Dremel and Rockwell all make versions.  Sonicrafter blades are excellent, but you can also find superb off-brand blades to replace all of the blades these companies make.  FitzAllBlades, the premier provider of replacement blades, offers durable, precise, high quality blades at a fraction of the brand name retail cost, usually from one half to 1/5 of the price.  If you make it a practice to get all of your replacement blades there, you will save even more money on construction and maintenance costs, allowing a bit more breathing room in your budget.

Multi Tool for Versatility

Some people are not familiar with the oscillating multi tool.  This work of engineering genius is a high powered tool with interchangeable blades, allowing it to do the work of dozens of standard tools.  Depending on the blade you pop into it, it can make a variety of cuts in a huge range of materials.  It can do precision cuts, long cuts, even plunge cuts in hardwood, soft woods, plywood, particle board, drywall, plastics, fiberglass, carpet, insulation board, cardboard, foam board, and other common materials.  A multi tool / oscillating tool replaces just about any kind of saw or cutting tool.  It can also be used to scrape, sand, grind, and polish, all depending on the blades you use.  You can find Fein, Bosch and, Dremel, and Rockwell have excellent versions of the oscillating tool, all with great performance and durability.  Sonicrafter blades are especially well known for their quality, but you can’t really go wrong with any of these tools.  These can save you money as you expand or need to replace tools because you simply get more “bang for your buck.”  You get one tool that does the job of many, and does those jobs very well.

The Oscillating Tool – Light and Portable

One of the big advantages of these tools, aside from their amazing versatility, is that they are so light and portable.  Depending on the layout of your shop or factory, you may have a lot of people and equipment crammed in.  It can be difficult to work your way around everything and everyone.  Each place is different, but it’s nice to have a tool that you can grab and take easily anywhere you need to go.  If you have repairs to do around the shop, this thing is the best.  You can easily take it on the roof, in crawlspaces, behind machines, under work benches… it can pretty much go anywhere you can.  They even make cordless versions, which opens up a whole new world of possibilities.

Saving Money on Tools and Blades

Like the blades of any power tool, even Sonicrafter blades eventually wear out.  You can buy name brand blades, which are very good, but they can add up in costs pretty quickly.  A busy factory or shop could go through hundreds of blades a year, so it’s a good idea to check out all of your options for replacements.  Fortunately, you can find off-brand replacement blades for all oscillating tool types.  These high-quality replacements are precise and durable, but they cost a fraction of the price of the name brand retail blades.  If you really want to streamline your processes and your budget, these replacement blades are the way to go.

Condensing and Simplifying with a Multi Tool

Tools can be extremely expensive.  If you have a passion for working with your hands, then you may want to develop an extensive collection of classic tools.  If you are just trying to learn some skills to fix up a house to sell, it’s probably not worth it to you to invest in a whole garage full of equipment.  Thank goodness for the multi tool, or oscillating tool.  These are some of the newest tools on the market, and they are not too expensive.  They take the place of dozens of other tools.  They are multi functioning power tools that have interchangeable blades, so you can use them for all kinds of tasks.  They replace just about every kind of saw – handsaw, band saw, reciprocating saw, jigsaw, table saw.  They cut through wood boards, flooring, shingles, carpet, drywall, plywood, insulation board, cardboard, plastics, fiberglass, copper piping, plaster, and just about any other material you are likely to have to deal with.  They even have attachments for scraping paint, removing tile grout, and cleaning up spilled concrete, three of the worst, most thankless jobs you may encounter while fixing up a house.  These tools are light, portable, easy to use, and easy to store.  They are the best way to save money on tool costs – just one tool and a set of blades, and you are ready to go.  Sonicrafter blades and tools are highly recommended, but Bosch, Dremel, and Fein all make great multi tools.

One Oscillating Tool, a Hundred Jobs

You may have to buy or borrow a few other tools – hammers, screw drivers, nail guns, whatever the jobs all for, but a multi tool will certainly cut down on your tool expenses.  When it comes to doing new jobs around the house, the internet is a big help.  It’s full of instructional videos that can help you do improvements and repairs yourself, and save on the costs of bringing someone in.  Of course, there is always the barter system too.  You may want to work out some kind of deal if you have a friend who is a professional plumber, electrician, or cabinet maker.  For simpler tasks, you may just want to have a party with free food and invite a group to come over to help you paint or sand hardwood floors.  Be creative and have fun.

Getting the Best Blades at the Best Prices

Bosch, Fein, Dremel, and Sonicrafter blades are wonderful, but they are not necessarily cheap.  Depending on how much you use them, and how quickly you go through them, they can add up to a pretty major expense over time.  Fortunately, there is a solution to that too.  Now you can get extremely high quality replacement blades for all makes and models of multi tools – durable and precise blades for a fraction of the price of the name brand blades.  Some blades can cost over $30, but you can get replacements for any blade from ½ to 1/5 of the name brand retail price.  Between the savings from the multi tool and the savings on discounted blades, you can make a big difference in your renovation budget.

Happy Halloween

Nick

Fitzallblades.com

Guess how many seeds were in the pumpkin and win a full set of our blades.

There is one thing an oscillating multi tool can do not just well but maybe even better than almost anything else you might have available. That is to fix one of those nagging door frames where the door hangs up when you try to open or close it. So long as you have already consulted the multi tool reviews and made your selection as to which one you prefer, the procedure for fixing one of these recalcitrant doors is rather simple. The following list should get you all the way through the process.

• First off, examine the door and decide where it is sticking. This is usually pretty easy to figure out. One way to make sure is to carefully examine the paint work on the frame. It should be marred or even worn away completely by a sticking door.

• This lets you know which area of the door itself needs adjustment. Always work on the door rather than on the door casing, because any alterations in the casing will be very noticeable while alterations in the door itself will be practically invisible in most cases.

• Take your multi tool out of its case and snap the sanding head into place, then apply one of the sanding pads to the head.

• Holding the tool parallel to the surface you desire to sand, move the tool gently back and forth, taking care not to twist the tool sideways or up and down to gouge the surface of the door. Test how the door fits occasionally as you work on it. When sanding, it is better to take off too little or just enough, rather than too much.

Houses can shift as they age and it is only natural for doors to get a little crooked over time. If, however, you notice that all or many of your doors are suddenly sticking when they never did before, you need to obtain professional advice. The home’s foundation is most likely shifting to an abnormal degree, possibly caused by some sort of water problem in the basement or crawl space.

Author Bio

Jennie is a DIY home enthusiast and blogger residing in the Pacific Northwest. For more information about home improvement and DIY projects, visit www.lifehacker.com.

The Fein Multimaster as you know is the holy grail of the oscillating tool world but the price has always kept it out of the hands of contractors looking for a good deal.  Well guess what, my fugal contactors and DYI’ers ! Home Depot is now selling the Fein Multmaster Model # FMM 250 Start Q for $199. Now you can own one of the best oscillating tools on the market and be the envy of your coworkers and neighbors without taking out a second mortgage on your home.

Every home handyman needs an oscillating tool which is great for doing precision work when sanding, scraping, trimming, chiseling or cutting. This is the tool of choice when cutting outlets, undercutting trim or cutting in flush trim moldings. There are four things to consider when looking to purchase a new oscillating tool:

(1) Weight and Balance
The first is the weight of the tool and how comfortable it feels when you hold it in your hand. Make sure that the body of the tool has enough mass to feel comfortable when the unit is turned on. Some oscillating tools that are compact feel good until they are turned on and the weight of the machine isn’t a good fit for the amount of vibration that the machine generates.

(2) Vibrational Strength
The second thing to look for is the amount of vibration that can be felt once the tool is turned on. A tool with excessive vibration can actually be painful to use on larger products that take more than a few minutes. So be careful when purchasing small cordless oscillating tools because their weight and vibration may make them an uncomfortable tool to handle for more than very small jobs lasting a few minutes.

(3) Power Source
The third thing to look for when purchasing a new oscillating tool is the type of power source it uses. Many small units are cordless and need to be plugged in when not in use in order to charge the battery. If it’s a battery charged unit, how many minutes can you use the tool before it needs a recharging? Does the battery offer any sort of guarantee on how long it will last before you have to spend additional money on a replacement? Are batteries for the oscillating tool easy to find as well as affordable? Larger oscillating tools for bigger jobs such as stripping tile mortar are units that operate only by attached power cord. If you want the versatility of attached cord as well as cordless battery operated, look for an oscillating tool that allows you to switch back and forth between the two power sources so you have flexibility if your work area has no electrical outlets.

(4) Accessories
The fourth thing to look for when investing in a new oscillating tool is the amount of accessories that come with the unit so it can be as versatile in its uses as possible. Some oscillating tools come equipped with a nice assortment of accessories to get you started and then you can purchase additional accessories as needed to make the tool even more versatile.

Author Bio

Jennie is an interior designer and DIY enthusiast. For more information on home improvement and DIY projects, visit hgtv.com.

Fitzall Blades 15% Off Weekend Sale

15% OFF SALE !
THIS WEEKEND

SATURDAY & SUNDAY ONLY !!

Use this coupon code on your next purchase at FitzAllBlades to save 15% off of your next purchase

Coupon Code - weekend15

*excludes our 13 blade set *

Good Until 1/21/13

Thank You for being a valued customer !

The FitzAllBlades Team